 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 2SK3000 Silicon N Channel MOS FET Low Frequency Power Switching ADE-208-585 (Z) 1st. Edition December 1997 Features * Low on-resistance R DS(on) = 0. 25 typ. (V GS = 10 V, ID = 450 mA) * 4V gate drive devices. * Small package (MPAK) * Expansive drain to source surge power capability Outline MPAK 3 1 D 3 2 2 G 1. Source 2. Gate 3. Drain S 1 2SK3000 Absolute Maximum Ratings (Ta = 25C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Reverse drain current Channel dissipation Channel temperature Storage temperature Note: Symbol VDSS VGSS ID I D(pulse) I DR Pch Tch Tstg Note2 Note1 Ratings 40 10 1.0 4.0 1.0 400 150 -55 to +150 Unit V V A A A mW C C 1. PW 10s, duty cycle 1 % 2. When using the glass epoxy board (10 mm x 10 mm x 1 mmt ) Electrical Characteristics (Ta = 25C) Item Drain to source breakdown voltage Drain to source voltage Gate to source breakdown voltage Symbol V(BR)DSS VDS(SUS) V(BR)GSS Min 40 40 10 -- -- 1.1 -- Typ -- -- -- -- -- -- 0.3 Max 60 -- -- 1.0 5 2.1 0.5 Unit V V V A A V S pF pF pF s s s s Test Conditions I D = 100A, VGS = 0 L = 100H, I D = 3 A I G = 100A, VDS = 0 VDS = 40 V, VGS = 0 VGS = 6.5V, VDS = 0 I D = 10A, VDS = 5V I D = 450 mA VGS = 4V Note3 -- 0.5 -- -- -- -- -- -- -- 0.25 1.2 14.0 68 3.0 0.12 0.6 1.7 1.4 0.3 -- -- -- -- -- -- -- -- I D = 450 mA VGS = 10V Note3 I D = 450 mA VDS = 10V Note3 VDS = 10V VGS = 0 f = 1MHz VGS = 4V, I D = 450 mA RL = 22 Zero gate voltege drain current I DSS Gate to source leak current I GSS Gate to source cutoff voltage VGS(off) Static drain to source on state RDS(on) resistance Static drain to source on state RDS(on) resistance Forward transfer admittance Input capacitance Output capacitance |yfs| Ciss Coss Reverse transfer capacitance Crss Turn-on delay time Rise time Turn-off delay time Fall time Note: 3. Pulse test 4. Marking is "ZY". t d(on) tr t d(off) tf 2 2SK3000 Main Characteristics Power vs. Temperature Derating 0.8 Maximum Safe Operation Area 50 s 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0. 1 Pch (W) s m I D (A) 1 0.6 m s 10 0 10 PW m Channel Dissipation 0.4 Drain Current s = Operation in this area is limited by R DS(on) DC O pe m s (1 ) ot sh ra t io n te No 0.2 5 0 50 100 150 200 0.05 0.2 Ta = 25 C 0.5 1 2 5 10 20 50 100 200 Ambient Temperature Ta (C) Drain to Source Voltage V DS (V) Typical Output Characteristics 5.0 10 V 6 V 5V 4.5 V 3.0 3.5 V 2.0 3V VGS = 2.5 V 0 2 4 6 Drain to Source Voltage 8 V DS (V) 10 100 0 10 Pulse Test 4V Typical Transfer Characteristics I D (A) I D (A) 4.0 1 25C 100m 125C Tc = -25C 10m Drain Current 1.0 Drain Current 1m V DS = 5 V Pulse Test 1 2 3 Gate to Source Voltage 4 5 V GS (V) 3 2SK3000 Drain to Source Saturation Voltage vs. Gate to Source Voltage Static Drain to Source on State Resistance vs. Drain Current 10 Pulse Test 3 1 0.3 0.1 VGS = 4 V 10 V Drain to Source Saturation Voltage V DS(on) (V) Pulse Test 0.8 0.6 0.4 ID=2A 1A 0.45 A 0.2 0 4 8 12 16 20 Drain to Source On State Resistance R DS(on) ( ) 1.0 0.03 0.01 0.01 0.03 0.1 0.3 1 3 10 Static Drain to Source on State Resistance R DS(on) ( ) Forward Transfer Admittance |y fs | (S) Static Drain to Source on State Resistance vs. Temperature 0.5 Forward Transfer Admittance vs. Drain Current 10 5 Tc = -25 C 2 1 75 C 0.5 25 C 0.4 I D = 0.45 A 0.3 VGS = 4 V 0.2 10 V Pulse Test 0 40 80 120 160 Case Temperature Tc (C) 0.45 A 0.1 0 -40 0.2 0.1 0.1 V DS = 10 V Pulse Test 0.2 0.5 1 2 5 Drain Current I D (A) 10 4 2SK3000 Typical Capacitance vs. Drain to Source Voltage 500 200 Capacitance C (pF) Switching Characteristics 5000 2000 1000 500 t d(off) tf tr VGS = 0 f = 1 MHz Coss 100 50 20 10 5 Ciss Switching Time t (ns) 200 100 50 0.05 0.1 t d(on) V GS = 4 V, V DD = 10 V PW = 5 s, duty < 1 % 0.2 0.5 Drain Current 1 2 I D (A) 5 Crss 2 1 0 4 8 12 16 20 Drain to Source Voltage V DS (V) Drain to Source DiodeReverse Surge Destruction Characteristics 500 Reverse Drain Current I DR (A) Reverse Drain Current vs. Source to Drain Voltage 5 10 V 4 5V V GS = 0 Applied Power Ps (W) 200 100 50 20 10 5 0.05 0.1 0.2 0.5 1 2 Ta = 25C 1 shot 3 2 1 Pulse Test 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage V SD (V) 5 10 20 50 Surge Pulse Width PW (mS) 5 2SK3000 Transient Thermal Resistance 1000 300 Thermal Resistance j-a (C/W) 100 30 10 Condition : Ta = 25C When using the glass epoxy board (10mm x 10mm x 1mmt ) 10 m 100 m 1 10 Pulse Width PW (S) 100 1000 3 1 1m Switching Time Test Circuit Vin Monitor D.U.T. RL Vin Vin 4V 50 V DD = 10 V Vout Vout Monitor Switching Time Waveforms 90% 10% 10% 90% td(on) tr 90% td(off) tf 10% 6 2SK3000 Package Dimensions Unit: mm 0.65 - 0.3 + 0.1 0.4 - 0.05 + 0.10 0.16 - 0.06 + 0.10 2.8 - 0.6 + 0.2 0.95 1.9 0.95 + 0.3 2.8 - 0.1 0.3 0.65 - 0.3 + 0.1 1.5 0 ~ 0.15 1.1- 0.1 + 0.2 MPAK Hitachi Code SC-59A EIAJ TO-236Mod. JEDEC 7 Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan. |
Price & Availability of 2SK3000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |